As part of Hamilton's innovative LEDIT-B100 range of LED dimmers, this Cheriton Georgian Polished Brass 1 Gang model (901XLEDITB100) offers 2 way switching and so much more. It's compatible with a diverse selection of dimmable lamps, ensuring smooth and quiet operation. You can use this clever dimmer in retrofit applications with standard 2 way rocker switches, making it perfect for large rooms with two entrances or lit staircases with switches at the top and bottom. It gives users the freedom to manually select their desired operating mode (trailing or leading edge) and can be fine-tuned for those tricky circuits with a mix of both types of LEDs. It also allows you to adjust your minimum settings and get your lighting just right.

• Product range: Cheriton Georgian
• Plate finish: Antique Brass
• Plate material: Metal
• Insert: Antique Brass Knob
• Resistive Leading Edge Push On/Off Rotary 2 Way Switching Dimmer
• Gangs: 3
• Wattage: 5 - 400 W
• Current rating: 1.66 A
• Voltage: 230 V AC
• Mains frequency: 50 Hz
• Ways: 2 Way
• Minimum load: 5 W mains LED lamp
• Maximum load: 400 W
• Switched poles: Single
• Resistive Leading Edge Push On/Off Rotary 2 Way Switching Dimmer
• Configurable minimum dimming level and dimming mode
• Tungsten filament GU10 lamps must be branded with a fuse base
• Compatible with incandescent lamps, mains halogen lamps, mains dimmable LED lamps, mains dimmable CFL lamps and dimmable LV electronic transformers
• Two operating modes: Trailing Edge (100 W maximum) or Leading Edge (100 W maximum)
• One-way and two-way switch for ON/OFF function (retrofit traditional dimmer)
• Built in short circuit protection that, once activated, will suspend operation for 5 seconds
• Soft start up and down feature helps to extend lamp life
• Thermo Circuit protection activates and disconnects the dimmer if the temperature rises above 110 ° C - after cooling to below 75 ° C, the dimmer resumes normal operation
• Set to Trailing Edge mode by default, but can be manually changed to Leading Edge mode
• Designed to fit a 35 mm flush wall box to BS4662:2006 standards (sold separately)
• 1 to 10 LEDs maximum
• Plate size: Double
• Plate width: 146 mm
• Plate height:  86.5mm
• Plate depth: 10.5 mm
• Minimum wall box depth: 35 mm
• CE marked
• IP rating: IP2XD
• Ambient operating temperature: -5 to +40 °C
• Internal Use Only
• Maximum installation altitude: 2,000 m
• Face plate must be earthed
• Terminal capacity:
  • 2 x 1 mm²
  • 2 x 1.5 mm²
• Earth terminal capacity:
  • 5 x 1 mm²
  • 4 x 1.5 mm²
  • 3 x 2.5 mm²
  • 1 x 4 mm² Multi-strand
  • 1 x 6 mm²
• BS EN ISO standard(s): BS EN 60669-2-1