Hamilton Linea-Scala CFX Black Nickel Frame/Bright Steel Plate 2 Gang 250W/210VA Multi-Way Touch Master Dimmer with Black Nickel Inserts and Black Surround

• Product range: Linea-Scala CFX
• CFX - Concealed fixing screws (i.e. screwless plate)
• Frame finish: Black Nickel
• Plate finish: Bright Steel
• Plate material: Metal (2 part)
• Insert: Black Nickel Inserts
• Surround: Black Surround
• Resistive/inductive trailing edge touch master dimmer switch
• Gangs: 2
• Wattage: 250 W resistive/210 VA inductive
• Current rating: 1.1 A per gang
• Voltage: 220/250 V AC
• Mains frequency: 50 Hz
• Ways: Multi-Way
• Minimum load: 25 W/25 VA
• Maximum load: 250 W resistive/210 VA inductive per gang
• Trailing Edge technology dimmer - suitable for control of both resistive and inductive loads
• When used for dimming low voltage electronic halogen transformers, it must be noted that the dimmer controls the primary side of the transformer
• Tungsten filament GU10 lamps must be branded with a fuse base
• When using mains voltage halogen lamps, dimmers should be de-rated by 25%
• When dimming LED lamps, dimmers should be de-rated by 75%
• When using a mains voltage halogen load transformer, the maximum rating is 210 VA
• For further information on compatibility, please contact Hamilton's Technical department
• For multi-way switching, a push to make retractive switch should be installed in the other positions
• Standard two way switches will NOT work with this product
• Plate size: Single
• Plate width: 91.5 mm
• Plate height: 91.5 mm
• Plate depth: 4 mm
• Minimum wall box depth: 35 mm
• IP rating: IP2XD
• Ambient operating temperature: -5 to +40 °C
• Internal Use Only
• Maximum installation altitude: 2,000 m
• Face plate must be earthed
• Terminal capacity:
  • 2 x 1 mm²
  • 2 x 1.5 mm²
• Earth terminal capacity:
  • 5 x 1 mm²
  • 4 x 1.5 mm²
  • 3 x 2.5 mm²
  • 1 x 4 mm² Multi-strand
  • 1 x 6 mm²
• BS EN ISO standard(s): BS EN 60669-2-1